View MUR21006_1286153.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MUR210
Preferred Device
SWITCHMODEt Power Rectifier
SWITCHMODE power rectifiers are state-of-the-art devices that are designed for use in switching power supplies, inverters and as free wheeling diodes.
http://onsemi.com Features
* * * * * *
Ultrafast 20 Nanosecond Recovery Times 175C Operating Junction Temperature Low Forward Voltage Low Leakage Current High Temperature Glass Passivated Junction These are Pb-Free Devices*
ULTRAFAST RECTIFIERS 2 AMPERES, 100 VOLTS
Mechanical Characteristics
* Case: Epoxy, Molded * Weight: 0.4 Gram (Approximately) * Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
* Lead and Mounting Surface Temperature for Soldering Purposes: *
220C Max for 10 Seconds, 1/16 from Case Polarity: Cathode Indicated by Polarity Band
DO-41 PLASTIC AXIAL LEAD CASE 59
MAXIMUM RATINGS
Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (Square Wave Mounting Method #3) (Note 1) Non-Repetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) Operating Junction Temperature and Storage Temperature Range Symbol VRRM VRWM VR IF(AV) Value 100 - 2.0 @ TA = 100C 35 Unit V
MARKING DIAGRAM
A MUR210 YYWW G G A = Assembly Location Y = Year WW = Work Week G = Pb-Free Package (Note: Microdot may be in either location)
A
IFSM
A
TJ, Tstg
-65 to +175
C
THERMAL CHARACTERISTICS
Characteristic Maximum Thermal Resistance, Junction-to-Ambient Symbol RqJA Value See Note 3 Unit C/W MUR210
ORDERING INFORMATION
Device Package Axial Lead* Axial Lead* Axial Lead* Axial Lead* Shipping 1000 Units/Bag 1000 Units/Bag 5000/Tape & Reel 5000/Tape & Reel
MUR210G MUR210RL MUR210RLG
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. Pulse Test: Pulse Width = 300 ms, Duty Cycle 2.0%.
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *This package is inherently Pb-Free.
Preferred devices are recommended choices for future use and best overall value.
*For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
(c) Semiconductor Components Industries, LLC, 2006
1
February, 2006 - Rev. 1
Publication Order Number: MUR210/D
MUR210
ELECTRICAL CHARACTERISTICS
Characteristic Maximum Instantaneous Forward Voltage (Note 2) (IF = 2.0 A, TJ = 150C) (IF = 2.0 A, TJ = 25C) Maximum Instantaneous Reverse Current (Note 2) (Rated DC Voltage, TJ = 150C) (Rated DC Voltage, TJ = 25C) Maximum Reverse Recovery Time (IF = 1.0 A, di/dt = 50 A/ms) (IF = 0.5 A, IR = 1.0 A, IREC = 0.25 A) Maximum Forward Recovery Time (IF = 1.0 A, di/dt = 100 A/ms, IREC to 1.0 V) 2. Pulse Test: Pulse Width = 300 ms, Duty Cycle 2.0%. Symbol VF 0.74 0.94 iR 50 2.0 trr 30 20 tfr 20 ns ns mA Value Unit V
10
10
IF, INSTANTANEOUS FORWARD CURRENT (AMPS)
1 VF @ 175C VF @ 25C
IF, INSTANTANEOUS FORWARD CURRENT (AMPS)
1 VF @ 175C VF @ 25C
VF @ 100C
VF @ 100C
0.1 0.3
0.5
0.7
0.9
1.1
1.3
0.1 0.3
0.5
0.7
0.9
1.1
1.3
VF, INSTANTANEOUS VOLTAGE (VOLTS)
VF, INSTANTANEOUS VOLTAGE (VOLTS)
Figure 1. Maximum Forward Voltage
Figure 2. Typical Forward Voltage
http://onsemi.com
2
MUR210
1000 IR, REVERSE CURRENT (mA) Ir @ 175C Ir @ 100C 10 Ir @ 25C 1
100.000 IR, REVERSE CURRENT (mA) Ir @ 175C
10.000
100
1.000 Ir @ 100C 0.100 Ir @ 25C 0.010
0.1
0.001 0 25 50 75 100 0 25 50 75 100 VR, REVERSE VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS)
Figure 3. Maximum Reverse Current
5 IF(AV), AVERAGE FORWARD 2.5
Figure 4. Typical Reverse Current
4 dc 3
TJ = 175C
PF(AV), AVERAGE POWER DISSIPATION (WATTS)
2.0
TJ = 175C
1.5 Square Wave 1.0 dc
2
Square Wave
1
0.5
0
0
50
100
150
200
0.0 0.0
0.5
1.0
1.5
2.0
2.5
3.0
TA, AMBIENT TEMPERATURE (C)
IF(AV), AVERAGE FORWARD CURRENT
Figure 5. Current Derating
Figure 6. Power Dissipation
50 TJ = 25C C, CAPACITANCE (pF) C, CAPACITANCE (pF) 40
50 TJ = 25C 40
30
30
20
20
10
10
0
0
10
20
30
40
50
0
0
10
20
30
40
50
VR, REVERSE VOLTAGE (VOLTS)
VR, REVERSE VOLTAGE (VOLTS)
Figure 7. Maximum Capacitance
Figure 8. Typical Capacitance
http://onsemi.com
3
MUR210
NOTE 3 - AMBIENT MOUNTING DATA
Data shown for thermal resistance junction to ambient (RqJA) for the mountings shown is to be used as typical guideline values for preliminary engineering or in case the tie point temperature cannot be measured.
TYPICAL VALUES FOR RqJA IN STILL AIR Mounting Method 1 2 RqJA 3 Lead Length, L 1/8 1/4 1/2 52 65 72 67 80 87 50 Units C/W C/W C/W
MOUNTING METHOD 1
L
L
EEEEEEEEEEE EEEEEEEEEEE
MOUNTING METHOD 2
L L
EEEEEEEEEEEE EEEEEEEEEEEE
Vector Pin Mounting MOUNTING METHOD 3
EE EE EE EE EE EE EE
L = 3/8
Board Ground Plane
P.C. Board with 1-1/2 X 1-1/2 Copper Surface
http://onsemi.com
4
MUR210
PACKAGE DIMENSIONS
AXIAL LEAD CASE 59-10 ISSUE U
B
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. ALL RULES AND NOTES ASSOCIATED WITH JEDEC DO-41 OUTLINE SHALL APPLY 4. POLARITY DENOTED BY CATHODE BAND. 5. LEAD DIAMETER NOT CONTROLLED WITHIN F DIMENSION. INCHES MIN MAX 0.161 0.205 0.079 0.106 0.028 0.034 --- 0.050 1.000 --- MILLIMETERS MIN MAX 4.10 5.20 2.00 2.70 0.71 0.86 --- 1.27 25.40 ---
K F
D
DIM A B D F K
A
POLARITY INDICATOR OPTIONAL AS NEEDED (SEE STYLES)
F K
SWITCHMODE is a trademark of Semiconductor Components Industries, LLC.
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082-1312 USA Phone: 480-829-7710 or 800-344-3860 Toll Free USA/Canada Fax: 480-829-7709 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Phone: 81-3-5773-3850 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative.
http://onsemi.com
5
MUR210/D

▲Up To Search▲

Price & Availability of MUR21006

	To Download MUR21006 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .